Jenks 124 Hybrid Lab "How To" Guide (BYOD)

You brought your laptop to class, but need to use a bigger screen and full-size keyboard and mouse?

Now you can control USB Type-C devices using one keyboard, mouse, and an HDMI monitor with the Access Pro 2-Port USB Type-C KVM Switch from IOGEAR.

To view content from your connected devices, the HDMI connection is HDCP compliant and supports resolutions up to 3840 x 2160 at 30 Hz for laptops and 1920 x 1080 at 60 Hz for smartphones and tablets. This switch also supports peripheral connectivity using two USB 3.1 Gen 1 Type-A ports, which are located in the front, these are connected to a standard keyboard and mouse setup.

Introduction: A USB-C multi-adapter hub is a versatile accessory that can expand the capabilities of your laptop or computer by providing various ports for connecting external devices. This guide will walk you through the steps to effectively use a USB-C multi-adapter hub, allowing you to connect additional peripherals and enhance your computing experience.

Table of Contents:

1. Inspecting the USB-C Multi-Adapter Hub
2. Connecting the USB-C Hub to Your Computer
3. Using the Hub's Ports and Functions
4. Disconnecting and Safely Removing the Hub
5. Troubleshooting Common Issues
6. Maintenance and Care

1. Inspecting the USB-C Multi-Adapter Hub:

• Examine the hub for its various ports, including USB-A, HDMI, Ethernet, SD card slot, and any other features specific to this model.
• Check for any included cables or adapters that may be required for certain connections.
• Ensure the hub is compatible with your computer's USB-C port and operating system.

2. Connecting the USB-C Hub to Your Computer:

• Power off your computer (if required by the hub's instructions).
• Locate the USB-C port on your computer and the corresponding USB-C connector on the hub.
• Insert the USB-C connector of the hub firmly into your computer's USB-C port.
• Power on your computer.

3. Using the Hub's Ports and Functions:

• Wait for your computer to recognize the hub. It should automatically configure the new connections.
• Some hubs may require you to install specific drivers or software for certain functions. Follow the manufacturer's instructions if needed. (This should work automatically.)

4. Disconnecting and Safely Removing the Hub:

• Before unplugging the hub, ensure all data transfers and operations with connected devices are completed.
• Safely eject or disconnect any external drives or devices from your computer.
• Carefully remove the USB-C hub from your computer's port by gently pulling it out.
• Power off or disconnect any peripherals you were using with the hub.

5. Troubleshooting Common Issues:

• If the hub is not recognized by your computer, check the compatibility and ensure the USB-C connection is secure.
• For performance issues or connectivity problems, try using a different USB-C port on your computer or a different cable.
• Update your computer's operating system and hub-specific drivers if available.

6. Maintenance and Care:

• Keep the USB-C hub clean and free from dust and debris.
• Store the hub in a safe place when not in use, preferably in hardware shelf built into the desk unit.
• Avoid exposing the hub to extreme temperatures or liquids.

Conclusion: A USB-C multi-adapter hub can significantly enhance your computing experience by expanding your device connectivity options. By following this guide, you should be able to use your hub effectively and troubleshoot common issues that may arise during use. Enjoy the convenience and versatility that a USB-C hub brings to your setup!